Inspecting
Your New Home
Once you have a firm
contract and you have selected the features that will go into your new
home, it is time for the builder to turn your dream into reality.
You will undoubtedly
want to visit the building site from time to time during construction to
check the progress of your home. Professional builders welcome your participation
and enthusiasm; however, for safety reasons you should not enter the actual
construction site unless by special appointment-an unauthorized site visit
may also contravene the local labour code with respect to construction
safety and the builder's liability.
Questions or concerns
arising from a site visit or a drive-by should be addressed directly to
the builder. The tradespeople on the site each have their own area of expertise
and will not be able to discuss your home's progress with you. Nor are
they able to make changes without the approval of the builder.
Before you take possession
of your new home, the builder will invite you to "walk through" the house
to conduct a pre-occupancy inspection. Three to five days before closing
is best-when construction is substantially complete but there is still
time for the builder to remedy any minor imperfections. Anything that is
not to your satisfaction should be noted for a pre-delivery inspection
report. Minor items such as scratches and incomplete paint work will be
rectified before your move-in day. Other items will be corrected after
you are settled.The following list will help you to inspect your new home.
Exterior
Wood, vinyl or aluminum
siding-should be even and nailed securely to the walls.
Brick/Stone-should
be evenly laid and cleaned
Caulking-check around
windows, doors, garage door
Paint and stains-inspect
for even coverage and proper colour
Trim, shutters, fascia
and soffit-must be proper colour, of good quality and securely fastened
Shingles-are they
clean, of proper colour and with no lifting corners?
Garage-should feature
non-combustible materials on the wall adjoining the house (for instance,
sheetrock with sealed joints); the garage door should open and close properly
Interior
Basement-should be
clean; no cracks in the walls; "healthy" looking wooden joists (a minimum
of splitting); instructions and warranty cards for equipment
Doors-must be well-fitted
and well-hung; secure locks for outside doors and door stops
Windows-must open
smoothly; lockable
Walls-should be smooth
and even; right colour; even paint coverage
Floors-minimum of
squeaks and "spring"; smooth seams on carpet and other floor covering;
even grouting between ceramic tiles
Plumbing fixtures-no
chips or scratches; faucets operating properly; caulking around counter
tops and fixtures
Upgrades and options-correct
materials and quality; proper installation; right colours
General state of cleanliness-no
construction debris; clean heating ducts; etc.
You might want to
hire a private building inspector or engineer to conduct the inspection
for you. Look in the phone book under Building Inspection Services.
The builder will also
pass on to you any warranties by manufacturers, suppliers and subcontractors
for products and services that went into the construction of the home.
Ask your builder for
information on the steps to follow, if problems with your new home arise
at a later date. The majority of problems will be corrected routinely and
quickly by the builder.
CONTENTS:
Inspecting
your new home
Getting
ready to move in
Taking
care of your new home